Companion Traders

Centrifugal Monoblock Pumps - Ct Series

C.R.I. Centrifugal Monoblock pump�s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristics. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw material, dynamically balanced impellers, seals and ball bearings to ensure long life. C.R.I Centrifugal monoblock pumps are powered by a totally enclosed fan cooled, A.C. induction motor, suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensure vibration and noise free operations. The varnish impregnated windings made of enameled copper wire offer excellent resistance. Shaft is made of quality steel, precision ground of ample size for transmitting the rated Horse power. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Thermal Over load Protector (motor protector) is incorporated in single phase motors upto 1.5 kW. Three phase pumps require an adequate motor protection control panel.

Specifications

Part Name	(Carbon & Ceramic)
Power Range(kW)	0.37 kW - 1.5 kW, Single phase 0.37 kW - 15 kW, Three phase
Speed	2900 rpm
Degree of Protection	IP 54
Class of insulation	'F'
Versions	A.C. 50 Hz, 230 V, Single Phase Permanent split capacitor (PSC) Incorporated with Thermal Overload Protector.
Versions	A.C. Three phase - 380-415 V - 50Hz
Direction of Rotation	Clockwise viewed from driving end
Duty	S1 (continuous)
Nominal Delivery Size in inches	1 to 2"
Screw Type	Upto 1"
Flange Type	Upto 2"

Pump Operating Limitations

Flow Rate Upto	10 lps / 36 m3/h
Maximum Total Head Upto	40m
Suction Lift Upto	7m
Maximum Liquid Temperature	50^OC
Maximum Ambient Temperature	40^OC

Applications

Domestic, Agriculture, Farms, Industry and Civil Applications.

PUMPED LIQUIDS

Clean, cold, thin, non aggressive, non explosive water without abrasives, solid particles or fibers.

Special Features

High operating efficiency resulting in lower power consumption, Good suction lift characteristics, Dynamically balanced rotating parts including rotor & impeller, Balanced and rigid construction.

location

The location of the pump should be such that the pump is easily accessible for regular inspection and it should be relatively free from dust, fumes and moisture. These pumps should be installed in a covered ventilated area, protected against the weather and it should not be installed in a tilted position.

Materials of Construction