|
Horizontal Centrifugal Pump - Mh Series |
 |
 |
 |
|
C.R.I MH
Series horizontal multistage centrifugal pumps are axial suction & vertical
radial delivery non-self priming pumps with threaded ports. The impellers,
diffusers & shaft of these pumps are made of AISI Stainless Steel and designed
to deliver the best possible hydraulic efficiency. The MH pump is a non
self-priming horizontal centrifugal pump with mechanical shaft seal and sealing
is by means of a bellows mechanical seal.
These pumps are Powered by a
totally enclosed fan cooled, A.C induction motor, suitable for continuous duty.
Motor stator is made of low watt loss steel laminations assembled under pressure
and rigidly locked in the frame. Dynamically balanced rotor ensures vibration
and noise free operations. Shaft is made of quality steel, Horsepower. All
single-phase pumps are incorporated with thermal over load protector. These
pumps require an adequate motor precision ground of ample size for transmitting
the rated protection control panel.Specifications
|
Power Range(kW) |
0.4 kW - 1.3 kW |
|
Speed |
2900 rpm |
|
Versions |
Single phase, 200-240V, 50Hz,
A.C. Supply, Permanent Split
Capacitor (PSC). Incorporated
with Thermal Overload Protected
|
|
Duty |
S1 (Continuous) |
|
Direction of Rotation |
Clockwise viewed from driving end |
|
Degree of Protection |
IP 54 |
|
Class of Insulation |
'F' |
|
Applications |
|
Industrial and Domestic water pressure boosting and distribution,
small farms, gardens, Pumping of clean liquids in industry , car
washing.
Pumped Liquids
Thin, cold, non aggressive and non explosive liquids without solid
particles or fibers.
Location
The location of the pump should be such that the pump is easily
accessible for regular inspection and it should be relatively free
from dust, fumes and moisture. These pumps should be installed in a
covered ventilated area, protected against the weather and it should
not be installed in a tilted position.
Special Features
Good suction lift characteristics, Dynamically balanced rotating
parts including rotor & impeller Optimal design, High operating
efficiency resulting in lower consumption, High working pressure.
Pump Operating Limitation
|
Maximum Suction Lift upto |
7 m |
|
Flow Rate upto |
2.5 lps / 9 m3/h |
|
Maximum Total Head (Shut-off Head) |
55 m |
|
Maximum Operating Pressure |
0.55MPa (5.5 bar) |
|
Maximum Liquid Temperature |
50OC |
|
Maximum Ambient Temperature |
55OC |
|
Nominal Suction x Delivery Size in inches |
1x1, 1�x1 |
Materials Of Construction
|
Part Name |
Material |
|
Motor body (Motor Frame) |
Aluminium |
|
Delivery Bracket (with threaded delivery opening) |
Cast-Iron |
|
Impellers |
Stainless Steel-304 |
|
Stage Casings |
Stainless Steel-304 |
|
Shaft |
Stainless Steel (AISI 410) |
|
Mechanical Seal |
Ceramic & Graphite |
|
Base Plate |
Mild Steel |
|
|
Products